Mill Rock – REVO® Research and Development Freeze Dryer

In stock

The REVO Research & Development Freeze Dryer has the largest shelves and best shelf-to-shelf spacing of any freeze dryer in its class offering up to 12 sq ft (1.115 sq M) of shelf area and a condensing rate of 20 Liters in 24 hours. This allows for more….

Compare

REVO® Freeze Dryer

Development & Small Scale Production

The REVO Research & Development Freeze Dryer has the largest shelves and best shelf-to-shelf spacing of any freeze dryer in its class offering up to 12 sq ft (1.115 sq M) of shelf area and a condensing rate of 20 Liters in 24 hours. This allows for more product throughput in the same floor space. Using the best components and design techniques combined with the most advanced PC/PLC control system, the REVO R&D Lyophilizer offers data collection and self-testing features. Overall, the REVO R&D Freeze Dryer is the perfect solution for both your protocol development and small scale lyophilization production needs.

Our easy-to-use software provides automatic freeze drying, defrost, system and leak rate testing. Data can be printed either numerically or graphically. This same control system is used on industrial dryers, allowing scaling to production. An interactive maintenance screen simplifies component servicing. All systems are remotely accessible, with customer approval, for trouble-shooting process issues. Now available with Clean in Place.

SYSTEM PERFORMANCE
  • 5 shelf pull down from 20 to –40C in less than 30 minutes
  • Vacuum pull down to 100 mT in less than 20 minutes
  • Vacuum leak rate less than 30 mT per hour
  • Vacuum level 10 mT in clean dry system (-85)

 

CONTROL SYSTEM

  • PC/PLC with ethernet and remote Internet connectivity
  • Manual and automatic operating modes
  • Graphic and numeric data collection
  • Automatic System and Leak Rate Testing
  • Options for Protocol Optimization and Controlled Nucleation

SHELF SYSTEM

  • Up to 12 sq. ft. of shelf area
  • 12″ x 24″ shelf size
  • Bulk or hydraulic stoppering option, 12 PSI stoppering pressure for 2ml vials
  • 316L stainless steel on all wetted parts

CONDENSER

  • Choke free design
  • External condenser with 6″ vapor port
  • Exposed coil condensing surface to eliminate vapor bypass
  • Hot gas defrost

REFRIGERATION

  • Oversized and highly reliable scroll compressors
  • CFC-free, non-proprietary refrigerants

VACUUM

  • Pirani vacuum sensor with solenoid control
  • Gas backfill
  • Corrosion resistant vacuum pump
  • Option: Capacitance manometer with proportional control

FITTINGS

  • Sanitary and KF fittings on all chamber access ports

Note: Specifications subject to change without notice. All specifications based on 20C ambient on 60Hz.

REVO STANDARD FEATURES

SHELF AREA 2 sq. ft. to 12 sq ft (0.186 to 1.115 sqM)
SHELF ASSEMBLY Bulk or Hydraulic Stoppering
SHELF TEMPERATURE RANGE -45ºC to 65°C (-53C Condenser)
-70ºC to 65°C (-85C Condenser)
SHELF HEAT TRANSFER Hollow Fluid Filled
SHELF SIZE/FINISH 12″x24″, 316L SS, 20Ra or better (305mm x 610mm)
CONDENSER TEMP -53°C or -85°C
CONDENSER CAPACITY 30L
CONDENSING RATE 20L in 24 hours
CONDENSER STYLE Exposed Coil, 6″ Vapor Port
DEFROST Hot Gas
COMPRESSORS (SCROLL) (-53C) 3.5 HP
(-85C) 3.5 HP 1st stage & 2 HP 2nd stage
PRODUCT SENSORS 4, Type T Thermocouples
VACUUM PUMP Corrosion Resistant
VACUUM CONTROL Pirani w/ Solenoid & Needle Valve
Option: Capacitance manometer with proportional control
GAS BACKFILL Included
CONTROL SYSTEM PC/PLC with Opti-Dry Software
TRAYS One per shelf included
CABINET 35″w x 46″d x 75″h
ELECTRICAL FOR -53C UNITS 230V/60Hz, 1ph, 30A
220V/50Hz, 1ph, 30A
380V/50Hz, 3ph, 30A
ELECTRICAL FOR -85C UNITS 230V/60Hz, 1ph, 40A
220V/50Hz, 1ph, 40A
380V/50Hz, 3ph, 25A
Be the first to review “Mill Rock – REVO® Research and Development Freeze Dryer”

Your email address will not be published.

Reviews

There are no reviews yet.

See It Styled On Instagram

    Instagram did not return any images.

Main Menu