Logo - Eden Lab

Wiggens – BR-4000 High Pressure Reactor

This high-pressure reactor is ideally suitable for larger experimental runs. This high-pressure reactor is available in stainless steel 1.4571 (SUS 316LTI), Hastelloy C-22, or with PTFE lining on all sides.
The usable volume of the reactor can be varied between 4,700 ml and 5,500 ml with or without the PTFE lining.
The BR 4000 high-pressure reactor is notable for its ease of handling. The reactor is closed using quick closure chain that can be attached without the use of tools. The reactor seal is established using a conical flange lock and O-ring seal of PTFE, FKM, or FFKM. The appropriate fitting inserts are available in stainless steel 1.4571 (SUS 316LTI) or Hastelloy C-22. A total of 6 connection options are provided in the lid, which can be selected from the following:
* Immersion tube for temperature probes
* Rupture disc of metal for the safe limitation of maximum pressure
* Pressure display
* Vent valve
* 2 freely selectable fittings, for example for a gas sampling valve or liquid sampling point
Temperature is regulated using a temperature probe which detects the inner temperature of the reactor in an immersion tube. A second temperature probe can optionally be used as an independent overheating safety. Appropriate stand systems are available.

*  4700, 5500 ml / 150 bar / 230℃
*  Quick closure chain, to be operated manually without tools
*  O-Seal ring made of Viton®, PTFE or Kalrez®
*  Either with PTFE-insert or completely made of SUS 316LTi or Hastelloy®
*  Heating by elctrical or thermostated mantle
*  Stiring by magnetic clutch and separate drive
*  Mounted on a laboratory cart for easy operation
*  Optionally internal heating/cooling coil
*  Optionally 2’nd thermocouple

6 Connections
*  Dip-tube for thermocouple
*  Rupture disc
*  Pressure gauge or sensor
*  Vent valve
*  2x optionally for liquid sampling, gas sampling ….

Technical Specification

Material SUS316Ti or HC SUS316Ti PTFE
Temperature max. 300℃ 230℃
Pressure max. 150 bar
Reactor Vessel Volume approx. 5,500 ml
Inner Diameter 136mm
Inner Height 390mm
Weight approx. 10.5 kg
TFMTM-PTFE Insert* (integrated) Volume approx. 4,700 ml*
Inner Diameter 126mm
Inner Height 378mm
Armatures Standard Armatures Rupture Disc, Dip Tube, Valve, Tool
Pressure Measurement analog and/or digital
Ports (total) 6
Ports (free) 2**
Type of connection 8 mm Tube Connection
Heating Systems (optional) Electrical Heating mantle CHM-4000
Julabo thermostat CTM-4000
Heating Coil
Stirring Overhead stirrer with magnetic clutch WB18D and RV 100-SS
Stand Electric lifting stand for BR-1000

* When using PTFE inserts the maximum allowable temperature is 230℃
* The number of free ports can be enlarged by the use of T-connections

Why Choose Eden Lab

Australian Company
Top Support
Full Spectrum of Products
Years of Experience

Fast Shipping

Ready to Ship Freeze Dryers

Top Support

Local Dedicated Support

Peace of Mind

Covered By Australian Law