Asynt offer a wide range of factory assembled PTFE reactor lids to suit your ReactoMate lab reactor setup. Utilising this robust, heat and chemically resistant material for your jacketed lab reactor gives you a strong and long lasting solution which can also easily be reconfigured.
These pre-assembled PTFE reactor lids come in a range of diameters to suit your preferred vessel:
- to fit 60 mm ID Schott type flanges
- to fit 100 mm ID Schott type flanges
- to fit 150 mm ID Schott type flanges
- to fit 200 mm ID Schott type flanges
Specification
The information below is also available on our “Download” tab in a printable PDF format:
| 60 mm Diameter Lid | – option 1 | ||
| Base | Port Type | Taper Joint | Port Size |
| Centre Port | Vertical | 24/- | 1/2″ NPT |
| Side Port 1 | 10o x 10o Compound Angle | 14/- | 1/2″ NPT |
| Side Port 2 | 10o x 10o Compound Angle | 14/- | 1/2″ NPT |
| Side Port 3 | 10o x 10o Compound Angle | 14/- | 1/2″ NPT |
| 60 mm Diameter Lid | – option 2 | ||
| Base | Port Type | Taper Joint | Port Size |
| Centre Port | Vertical | 24/- | 1/2″ NPT |
| Side Port 1 | 10o x 10o Compound Angle | 19/- | 1/2″ NPT |
| Side Port 2 | 10o x 10o Compound Angle | 19/- | 1/2″ NPT |
| Side Port 3 | 10o x 10o Compound Angle | 19/- | 1/2″ NPT |
| 100 mm Diameter Lid | – option 1 | ||
| Base | Port Type | Taper Joint | Port Size |
| Centre Port | Vertical | 24/- | 3/4″ NPT |
| Side Port 1 | Vertical | 24/- | 3/4″ NPT |
| Side Port 2 | 10o Angle | 24/- | 3/4″ NPT |
| Side Port 3 | 10o Angle | 19/- | 3/4″ NPT |
| Side Port 4 | 10o x 10o Compound Angle | 24/- | 3/4″ NPT |
| 100 mm Diameter Lid | – option 2 | ||
| Base | Port Type | taper Joint | Port Size |
| Centre Port | Vertical | 29/- | 3/4″ NPT |
| Side Port 1 | Vertical | 24/- | 3/4″ NPT |
| Side Port 2 | 10o Angle | 19/- | 3/4″ NPT |
| Side Port 3 | 10o Angle | 24/- | 3/4″ NPT |
| Side Port 4 | 10o x 10o Compound Angle | 29/- | 3/4″ NPT |
| 150 mm Diameter Lid | – option 1 | ||
| Base | Port Type | Taper Joint | Port Size |
| Centre Port | Vertical | 29/- | 1″ NPT |
| Side Port 1 | Vertical | 24/- | 1″ NPT |
| Side Port 2 | Vertical | 29/- | 1″ NPT |
| Side Port 3 | 10o Angle | 45/- | 1″ NPT |
| Side Port 4 | 10o x 10o Compound Angle | 29/- | 1″ NPT |
| 150 mm Diameter Lid | – option 2 | ||
| Base | Port Type | Taper Joint | Port Size |
| Centre Port | Vertical | 34/- | 1″ NPT |
| Side Port 1 | Vertical | 29/- | 1″ NPT |
| Side Port 2 | Vertical | 29/- | 1″ NPT |
| Side Port 3 | 10o Angle | 45/- | 1″ NPT |
| Side Port 4 | 10o x 10o Compound Angle | 29/- | 1″ NPT |
| 200mm Diameter Lid | – Option 1 | ||
| Base | Port Type | Taper Joint | Port Size |
| Centre Port | Vertical | 34/- | 1″ NPT |
| Side Port 1 | Vertical | 29/- | 1″ NPT |
| Side Port 2 | Vertical | 29/- | 1″ NPT |
| Side Port 3 | 10o Angle | 29/- | 1″ NPT |
| Side Port 4 | 10o x 10o Compound Angle | 29/- | 1″ NPT |
| Side Port 5 | 10o Angle | 45/- | 1.5″ NPT |
| 200 mm Diameter Lid | – Option 2 | ||
| Base | Port Type | Taper Joint | Port Size |
| Centre Port | Vertical | 1″ NPT | |
| Side Port 1 | Vertical | 1″ NPT | |
| Side Port 2 | Vertical | 1″ NPT | |
| Side Port 3 | 10o Angle | 1″ NPT | |
| Side Port 4 | 10o x 10o Compound Angle | 1″ NPT | |
| Side Port 5 | 10o Angle | 1.5″ NPT |
