Wiggens – NR-10L Low Pressure Reactor

This low-pressure reactor is ideally suitable for larger experimental runs. This low-pressure reactor is available in stainless stee, Hastelloy, or with PTFE lining on all sides. The usable volume of the reactor can be varied between 5L and 10L using different reactor vessels.

The NR-5L/10L low-pressure reactor is notable for its ease of handling. The reactor is closed using a manual quick closure that can be attached without the use of tools. The reactor seal is established using a conical flange lock and O-ring seal of PTFE, FKM, or FFKM. The appropriate fitting inserts are available in stainless steel or Hastelloy. A total of 7 connection options are provided in the lid, which can be selected from the following:

* Gas sampling
* Rupture disc of metal for the safe limitation of maximum pressure
* Pressure display
* Vent valve
* Dip-tube liquid sampling
* Thermocouple with dip-tube
* Exhaust hose

Temperature is regulated using a temperature probe which detects the inner temperature of the reactor in an immersion tube. A second temperature probe can optionally be used as an independent overheating safety.Appropriate stand systems are available.

Features
*  5L or 10L / 25 bar / 300℃ (PTFE-Lined 230° )
*  With or without bottom drain valve
*  Quick closure chain, to be operated manually without tools
*  O-seal ring made of Viton®, PTFE or Kalrez®
*  Either with PTFE-insert or completely made of SUS 316L or Hastelloy®
*  Heating by elctrical or thermostated mantle
*  Stiring by magnetic clutch and separate drive
*  Optionally internal heating/cooling coil

Technical Specification